AudioCodes Mediant 1000 Manuel d'utilisateur télécharger pdf (Page 10)

SIP SOLUTIONS TRUNKING

Configuration Settings, Notes, & Recommendations

Page 9

March 2012

Not modified or used in this configuration.

In this section the DTMF Transport Type must be set to RFC2833 Relay DTMF. All other setting

are left at their default values.

Facsimile (Fax) testing was not part of the certification process as it is not a natively supported

service within Microsoft Lync 2010. In the event that an analog fax adjunct is available, the

MSBG configuration needs to be modified appropriately. In fact, the MSBG has the capability to

function as an analog (FXS) gateway.

The maximum speed of fax transmission supported, using T.38 protocol, is 14,400 bps.

Therefore, Fax Relay Max Rate must be configured for ‘14400bps.’ The Fax Transport Mode

must be set to ‘RelayEnable.’ In addition, the various modem types that will be supported must

be set to ‘Enable Relay.’ The Fax CNG Mode must be enabled. The CNG Detector Mode must

be set to ‘Relay.’ Finally, the Fax/Modem Bypass Coder Type must be configured to

‘G711Mulaw.’

PSTN

VOIP

All Sections

SIGNALING

VOIP

All Sections

MEDIA

VOIP

Voice

MEDIA

VOIP

Fax/Modem/CID Settings

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Pas de commentaire

AudioCodes Mediant 1000 Manuel d'utilisateur Page 10