AudioCodes MEDIAPACK VERSION 6.2 Manuel d'utilisateur télécharger pdf (Page 165)

User's Manual A. MediaPack Applications

Version 2.2 165 July 2007

The procedure below describes the Fax configuration. This configuration applies to both

Unit A and Unit B.

¾ To configure the FAX parameters:

1. Complete the initial settings configuration (refer to Section 'Initial Configuration' on

page 39).

2. Configure the MediaPack ISDN-to-IP FAX settings:

• Open the 'ISDN Profiles' screen (Protocol Management menu > Profile

Definitions submenu > ISDN Profiles option).

• From the 'Fax Signaling Method' drop-down list, enable Fax data transfer protocol

by selecting either 'T.38 Relay' or 'G.711 Transport' (e.g. 'T.38 Relay').

Figure A-7: Fax Transfer Enabled (e.g., T.38 Relay)

3. Configure the MediaPack IP-to-ISDN Fax settings:

• Open the 'IP Profiles' screen (Protocol Management menu > Profile

Definitions submenu > IP Profiles option).

• From the 'Fax Signaling Method' drop-down list, select 'T.38 Relay'.

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 179 180

Pas de commentaire

AudioCodes MEDIAPACK VERSION 6.2 Manuel d'utilisateur Page 165