AudioCodes MEDIAPACK VERSION 6.2 Manuel d'utilisateur télécharger pdf (Page 158)

MediaPack BRI Series

User's Manual 158 Document #: LTRT-83702

A.1.2 Using Point-to-Point Connections, PBX Trunk Interface

A Point-to-Point connection between the PBX and the MediaPack is illustrated in the

network architecture diagram below (Figure A-2). The MediaPack is connected to the

PBX’s Trunk interface. In other words, the MediaPack provides an ISDN Network and the

PBX is a User/Terminal device.

Figure A-2: Connecting to a PBX using Point-to-Point Connection, PBX Trunk Interface

¾ To configure the MediaPack connection to the PBX:

1. Perform the initial configuration of the MediaPack’s IP interfaces and network settings

(refer to Section 'Connecting MediaPack's LAN Interface to your PC' on page 40).

2. Access the ‘ISDN Ports’ screen (Protocol Management menu > ISDN submenu >

ISDN Port Settings option).

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 179 180

Pas de commentaire

AudioCodes MEDIAPACK VERSION 6.2 Manuel d'utilisateur Page 158