AudioCodes MEDIAPACK VERSION 6.2 Manuel d'utilisateur télécharger pdf (Page 145)

User's Manual 6. Configuring the MediaPack

Version 2.2 145 July 2007

Table 6-26: Software Upgrade CLI Parameters

Parameter Description

copy tftp

Loads the new software using TFTP to the MediaPack.

The format is:

copy tftp://<IP address of your TFTP server>/<name of the directory in which

the new SW files are located> / <name of the download script>

Using CLI

To upgrade the MediaPack software via CLI:

1. Open a CLI session using Telnet or a serial connection.

2. Log on to the system. Default username and password: user=”Admin”; password=”Admin”.

3. Type the enable command to acquire administrative privileges.

4. Change the "execution" mode to “configuration”.

5. Use the following command: copy tftp

For example: copy tftp://10.33.2.2/mp40x_sip_2_0_17_9328/mp40x_sip_2_0_17_9328 flash.

To activate the new version (after the SW version download process completes), reset the MediaPack.

To view the downloaded SW version (after the gateway is reset), use the command show version.

Note: An upgrade procedure can only be performed in execution mode with administrative privileges.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 179 180

Pas de commentaire

AudioCodes MEDIAPACK VERSION 6.2 Manuel d'utilisateur Page 145