AudioCodes Mediant 3000 Manuel d'utilisateur télécharger pdf (Page 64)

AudioCodes Mediant E-SBC 64 Document #: LTRT-40821

Microsoft Lync and XO Technology SIP Trunk

4.13 Step 13: Configure Message Manipulation Rules

This step describes how to configure SIP message manipulation rules. SIP message

manipulation rules can include insertion, removal, and/or modification of SIP headers.

Manipulation rules are grouped into Manipulation Sets, enabling you to apply multiple rules

to the same SIP message (IP entity).

Once you have configured the SIP message manipulation rules, you need to assign them

to the relevant IP Group (in the IP Group table) and determine whether they must be

applied to inbound or outbound messages.

 To configure SIP message manipulation rule:

1. Open the Message Manipulations page (Configuration tab > VoIP menu > SIP

Definitions > Msg Policy & Manipulation > Message Manipulations).

2. Configure a new manipulation rule (Manipulation Set 2) for Lync Server 2013. This

rule applies to messages sent to the XO Communications SIP Trunk (IP Group 2), for

simultaneous ringing initiated by the Lync Server 2013 (IP Group 1). This adds an

Action Value containing the Reason for the History-Info header, causing the E-SBC to

add a diversion header towards the SIP Trunk.

Parameter Value

Index

Manipulation Set ID

Message Type

invite.request

Condition

header.history-

info.0==regex.(<.*)(user=phone)(>)(.*)

Action Subject

header.history-info.0

Action Type

Modify

Action Value

$1+$2+'?Reason=SIP%3Bcause%3D404'+$3+

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 77 78

Pas de commentaire

AudioCodes Mediant 3000 Manuel d'utilisateur Page 64