AudioCodes Mediant 3000 Manuel d'utilisateur télécharger pdf (Page 45)

Configuration Note 4. Configuring AudioCodes E-SBC

Microsoft Lync and XO Technology SIP Trunk 45 AudioCodes Mediant E-SBC

Reset SRTP State Upon Rekey

Enable

Note: Currently, you cannot configure this

parameter through the Web-based

management tool. As an alternative, use the

ini configuration file, as follows:

1 When you have completed all

configuration, save the configuration to an

ini file (see Appendix A on page 71 ).

2 Open the file and search for "IpProfile 1".

3 For this IP Profile, set the

IpProfile_ResetSRTPStateUponRekey

parameter to 1. This value is located

sixth from the end of the line (i.e.,

semicolon): "

1, 0, 1, 0, 3, 0;"

4 Save the file and load it to the device.

SBC Remote Hold Format

Inactive

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 77 78

Pas de commentaire

AudioCodes Mediant 3000 Manuel d'utilisateur Page 45