AudioCodes Mediant 3000 Manuel d'utilisateur télécharger pdf (Page 63)

Configuration Note 4. Configuring AudioCodes E-SBC

Microsoft Lync and XO Technology SIP Trunk 63 AudioCodes Mediant E-SBC

4. Click the Action tab, and then configure the parameters as follows:

Parameter Value

Prefix to Add

+ (plus sign)

Figure 4-36: Configuring IP-to-IP Outbound Manipulation Rule - Action Tab

5. Click Submit.

The figure below shows an example of configured IP-to-IP outbound manipulation rules for

calls between IP Group 1 (i.e., Lync Server 2013) and IP Group 2 (i.e., XO

Communications SIP Trunk):

Figure 4-37: Example of Configured IP-to-IP Outbound Manipulation Rules

Rule Index Description

Calls from IP Group 2 to IP Group 1 with any destination number (*), add "+" to the

prefix of the destination number.

Calls from IP Group 1 to IP Group 2 with the prefix destination number "+", remove "+"

from this prefix.

Calls from IP Group 1 to IP Group 2 with source number prefix "+", remove the "+" from

this prefix.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 77 78

Pas de commentaire

AudioCodes Mediant 3000 Manuel d'utilisateur Page 63