AudioCodes Mediant 3000 Manuel d'utilisateur télécharger pdf (Page 15)

Configuration Note 3. Configuring Lync Server 2013

Microsoft Lync and XO Technology SIP Trunk 15 AudioCodes Mediant E-SBC

3 Configuring Lync Server 2013

This chapter describes how to configure Microsoft Lync Server 2013 to operate with

AudioCodes E-SBC.

Note: Dial plans, voice policies, and PSTN usages are also necessary for Enterprise

voice deployment; however, they are beyond the scope of this document.

3.1 Configuring the E-SBC as an IP / PSTN Gateway

The procedure below describes how to configure the E-SBC as an IP / PSTN Gateway.

 To configure E-SBC as IP/PSTN Gateway and associate it with Mediation Server:

1. On the server where the Topology Builder is installed, start the Lync Server 2013

Topology Builder (Windows Start menu > All Programs > Lync Server Topology

Builder), as shown below:

Figure 3-1: Starting the Lync Server Topology Builder

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 77 78

Pas de commentaire

AudioCodes Mediant 3000 Manuel d'utilisateur Page 15