AudioCodes Mediant 3000 Manuel d'utilisateur télécharger pdf (Page 61)

Configuration Note 4. Configuring AudioCodes E-SBC

Connecting Microsoft Lync 2013 to a SIP Trunk 61 June 2013

4.9 Step 9: Configuring SRTP

This step shows how to configure media security. If you configure the Microsoft Mediation

Server to use Secure Real-Time Transport Protocol (SRTP), configure the E-SBC to do so

as well.

Note that SRTP was enabled for Lync Server 2013 when you added an IP Profile for Lync

Server 2013 (see Section 4.6 on page 49).

 To configure media security:

1. Open the Media Security page (Configuration tab > VoIP > Media > Media

Security).

Figure 4-28: Media Security Page

2. Configure the parameters like this:

Parameter Example Setting

Media Security

Enable

Master Key Identifier (MKI) Size "1"

Symmetric MKI Negotiation

Enable

3. Click Submit.

4. Reset the E-SBC with a burn to flash for your settings to take effect (see Section 4.16

on page 73).

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 79 80

Pas de commentaire

AudioCodes Mediant 3000 Manuel d'utilisateur Page 61