AudioCodes Mediant 3000 Manuel d'utilisateur télécharger pdf (Page 55)

Configuration Note 4. Configuring AudioCodes E-SBC

Connecting Microsoft Lync 2013 to a SIP Trunk 55 June 2013

4.8 Step 8: Configuring a SIP TLS Connection

This step shows how to configure the E-SBC to use a TLS connection with the Lync Server

2013 Mediation Server. This step is mandatory for a secure SIP TLS connection.

4.8.1 Configuring the NTP Server Address

This step shows how to configure the NTP server's IP address. It's recommended to

implement an NTP server (Microsoft NTP server or third-party server) to ensure that the

E-SBC receives accurate and current date and time. This is necessary for validating

certificates of remote parties.

 To configure the NTP server address:

1. Open the Application Settings page (Configuration tab > System > Application

Settings).

2. In the 'NTP Server IP Address' field, enter the IP address of the NTP server

(e.g., 10.15.21.10).

Figure 4-19: Configuring the NTP Server IP Address

3. Click Submit.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 79 80

Pas de commentaire

AudioCodes Mediant 3000 Manuel d'utilisateur Page 55