AudioCodes Mediant 3000 Manuel d'utilisateur télécharger pdf (Page 44)

Connecting Microsoft Lync 2013 to a SIP Trunk

AudioCodes Mediant E-SBC 44 Document #: LTRT-54004

4.4 Step 4: Configuring Proxy Sets

This step shows how to configure the Proxy Sets. A Proxy Set is a group of Proxy servers

defined by IP address or fully qualified domain name (FQDN). In the example scenario, two

Proxy Sets must be configured for:



Microsoft Lync Server 2013



SIP Trunk

These Proxy Sets will later be associated with IP Groups.

 To add Proxy Sets:

1. Open the Proxy Sets Table page (Configuration tab > VoIP > Control Network >

Proxy Sets Table).

2. Add a Proxy Set for Lync Server 2013:

a. Configure these parameters:

Parameter Example Setting

Proxy Set ID

Proxy Address "FE15.ilync15.local:5067"

(the Lync Server 2013 SIP Trunking IP address or

FQDN and destination port)

Transport Type

TLS

Enable Proxy Keep Alive

Using Options

Proxy Load Balancing Method

Round Robin

Is Proxy Hot Swap

Yes

SRD Index "1"

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 79 80

Pas de commentaire

AudioCodes Mediant 3000 Manuel d'utilisateur Page 44