AudioCodes Mediant 1000 Manuel d'installation télécharger pdf (Page 19)

Version 6.0 19 February 2010

Installation Manual 2. Installing the Device

2.4.1 Connecting to Earth (Ground)

The device must be permanently connected to earth (ground), using an equipment-earthing

conductor.

Protective Earthing

The equipment is classified as Class I EN60950 and UL60950 and must be

earthed at all times.

¾ To earth the device:

1. Connect an electrically earthed strap of 16 AWG wire (minimum) to the chassis'

earthing screw (located on the rear panel), using the supplied washer.

2. Connect the other end of the strap to a protective earthing. This should be in

accordance with the regulations enforced in the country of installation.

Figure 2-6: Earthing the Device

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 75 76

Pas de commentaire

AudioCodes Mediant 1000 Manuel d'installation Page 19