AudioCodes Mediant 1000 Manuel d'installation télécharger pdf (Page 15)

Version 6.0 15 February 2010

Installation Manual 2. Installing the Device

2.3 Mounting the Device

The device can be mounted in one of the following ways:

 Placed on a desk top (refer to 'Desktop Mounting' on page 15)

 Installed in a

standard 19-inch rack (refer to 'Installing the Device in a 19-inch Rack' on

page 16)

2.3.1 Desktop Mounting

The device can be mounted on a desktop by attaching the four anti-slide bumpers

(supplied) to the underside of the device. Once you have attached these bumpers, simply

place it on a desktop in the desired position.

Figure 2-3: Attached Rubber Foot on Underside of Chassis

¾ To attach the anti-slide rubber bumpers to the device:

1. Flip the device over so that its underside faces up.

2. Locate the four anti-slide grooves on the underside - one on each of the four corners.

Figure 2-4: Location of Grooves for Rubber Feet

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 75 76

Pas de commentaire

AudioCodes Mediant 1000 Manuel d'installation Page 15