AudioCodes Mediant TP-1610 H.323 Manuel d'utilisateur télécharger pdf (Page 85)

SIP User's Manual 5. Web Management

Version 5.0 85 October 2006

Note that an NFS file server can share multiple file systems. There must be a separate row

for each remote file system shared by the NFS file server that needs to be accessed by the

gateway.

¾ To configure the NFS Settings parameters, take these 7 steps:

1. Open the ‘Application Settings’ screen (Advanced Configuration menu > Network

Settings > Application Settings option); the ‘Application Settings’ screen is

displayed.

2. Open the NFS Table screen by clicking the arrow sign (-->) to the right of the NFS

label; the NFS Table screen is displayed (Figure 5-19).

Figure 5-19: NFS Settings Table Screen

3. To add a remote NFS file system, select an available line number from the Line

Number drop-down list.

4. Click the Add an Empty Line button; an empty line appears.

5. Configure the NFS Settings. The NFS parameters are described in Table 6-1 on page

130.

6. Click the Apply New Settings button; the remote NFS file system is mounted

immediately. Check the Syslog server for the ‘NFS mount was successful’ message.

7. To save the changes so they are available after a power fail, refer to Section 5.9.2 on

page 124.

Note: To avoid terminating calls in progress, a row must not be deleted or

modified while the board is currently accessing files on that remote NFS file

system.

¾ To delete a remote NFS file system, take these 3 steps:

1. Click the Edit radio button for the row to be deleted.

2. Click the Delete Line button; the row is deleted.

3. To save the changes so they are available after a power fail, refer to Section 5.9.2 on

page 124.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 403 404

Pas de commentaire

AudioCodes Mediant TP-1610 H.323 Manuel d'utilisateur Page 85