AudioCodes Mediant TP-1610 H.323 Manuel d'utilisateur Page 299
- Page / 404
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
SIP User's Manual 13. Security
Version 5.0 299 October 2006
Figure 13-16 shows an advanced example of an access list definition via ini file:
Figure 13-16: Advanced Example of an Access List Definition via ini File
[ ACCESSLIST ]
FORMAT AccessList_Index = AccessList_Source_IP, AccessList_Net_Mask,
AccessList_Start_Port, AccessList_End_Port, AccessList_Protocol,
AccessList_Packet_Size, AccessList_Byte_Rate, AccessList_Byte_Burst,
AccessList_Allow_Type;
AccessList 10 = 10.0.0.0, 255.0.0.0, 0, 65535, any, 0, 40000, 50000, allow ;
AccessList 15 = 10.31.4.0, 255.255.255.0, 4000, 9000, any, 0, 0, 0, allow ;
AccessList 20 = 0.0.0.0, 0.0.0.0, 0, 65535, any, 0, 0, 0, block;
[ \ACCESSLIST ]
Explanation of the example access list:
This access list consists of three rules:
Rule #10: traffic from the subnet 10.xxx.yyy.zzz is allowed if the traffic rate does not
exceed 40 KB/s.
Rule #15: if a packet didn't match rule #10, that is, the excess traffic is over 40 KB/s,
and coming from the subnet 10.31.4.xxx to ports 4000 to 9000, then it is allowed.
Rule #20: all other traffic (which didn't match the previous rules), is blocked.
The internal firewall can also be configured via the Embedded Web Server (refer to Section
5.6.8.3 on page 101).
- User’s Manual Version 5.0 1
- Table of Contents 3
- List of Figures 10
- List of Tables 13
- Reader's Notes 16
- Related Documentation 18
- 1 Overview 19
- 1.3 TP-1610 Overview 20
- 1.4 TP-260 Overview 21
- 1.5 SIP Overview 22
- 1.6 Features 23
- 2 Physical Description 27
- 2.1.2 Optional CPU Board 28
- 2.2.2 on page 31) 29
- RJ-48c Connector and Pinout 32
- 2.3.1 TP-260 LEDs 33
- 3 Installation 35
- Electrical Earthing 39
- 1 2 3 4 5 6 7 8 41
- 3.2 Installing the TP-1610 44
- 3.2.4 Cabling the TP-1610 45
- 3.3 Installing the TP-260 46
- 3.3.3 Installing the TP-260 47
- 3.3.4 Cabling the TP-260 47
- 4 Getting Started 49
- 11.1 on page 247) 50
- 5 Web Management 55
- 5.2.1 User Accounts 56
- 5.6.8.1 on page 98. Note 57
- 5.4.1 Main Menu Bar 60
- 5.4.2 Saving Changes 60
- 5.5 Protocol Management 63
- 5.5.2 Advanced Parameters 64
- 6-10 on page 180) 72
- 5.5.5.4 on page 75 72
- 5.5.5.3 Internal DNS Table 74
- 5.5.5.4 Internal SRV Table 75
- H on page 379) 77
- 5.5.6.2 Tel Profile Settings 79
- 5.5.6.3 IP Profile Settings 80
- 5.6 Advanced Configuration 84
- 12.2.4 on 90
- 12.2.4 on page 272 91
- 5.6.4.2 Configuring Links 92
- 5.6.7 Regional Settings 97
- 5.6.8 Security Settings 98
- 15.7.1 on page 316 104
- 5.7 Status & Diagnostic 106
- Column Name Description 107
- 5.7.1.2 Call Counters 108
- 5-13 on 108
- 5.7.1.3 Call Routing Status 109
- 5-39 shows the possible 110
- 14.2 on page 304 112
- 6-2) to determine 112
- 5.7.4 Device Information 113
- 9.1 on page 229 114
- 5.8 Software Update Menu 115
- 5.8.2 Auxiliary Files 119
- 11.7 on page 262 121
- 5.9 Maintenance 122
- 5.9.2 Saving Configuration 124
- 5.2.1 on page 56 126
- 6.1 Secured ini File 127
- 6.2 Modifying an ini File 127
- 6.3 The ini File Content 128
- 6.4 The ini File Structure 128
- 6.5 The ini File Example 129
- 6.6 Networking Parameters 130
- [NTP UTC Offset] 134
- 6.7 System Parameters 138
- 6.9 Security Parameters 145
- 6.10 RADIUS Parameters 147
- 6.11 SNMP Parameters 148
- 6.13 Voice Mail Parameters 170
- 6.17 Channel Parameters 196
- Web Parameter Name 197
- 5.8.2 on page 119), or via 201
- 7 Using BootP / DHCP 203
- 7.2 Using DHCP 204
- 7.3 Using BootP 205
- 8 Telephony Capabilities 207
- 8.3.1 Fax/Modem Settings 210
- 8.5 ThroughPacket™ 214
- 8.8 Call Detail Report 217
- 8.12 SIP Call Flow Example 223
- 9 Networking Capabilities 229
- 9.3 NAT Support 230
- 9.3.1 STUN 231
- 9.3.3 No-Op Packets 232
- 9.4.2 PPPoE Overview 234
- 9.5 IP Multicasting 235
- 9-1 on page 238 236
- 6-1 on page 130 236
- 9.10 VLANS and Multiple IPs 237
- 9.10.2.1 Operation 239
- 10.1 Gateway Clock Settings 243
- 10.2 ISDN Overlap Dialing 243
- 10.3 Using ISDN NFAS 244
- 10.3.1 NFAS Interface ID 245
- Mediant 2000 248
- 6-2 on page 138 249
- 11.4 Startup Process 251
- 11.5 Using Parameter Tables 253
- 11.5.2 Table Permissions 254
- 11.5.4 Secret Tables 254
- 11.7 Software Upgrade Key 262
- 6 steps: 263
- 14.2 on page 264
- 11.7.5 Abort Procedure 265
- 12 Special Applications 267
- 12.2 SS7 Tunneling 269
- 12.2.2 SS7 Characteristics 270
- 12.2.3 SS7 Parameters 271
- 12.2.4 SS7 Parameter Tables 272
- 12.2.4.3 SS7 Signaling Link 274
- 12.3 QSIG Tunneling 280
- 13 Security 281
- 13.1.1 IKE 282
- 13.1.2 IPSec 282
- 13.1.3.1 IKE Configuration 283
- 13-2 below) are applied 284
- 11.5 on page 284
- 13.1.3.2 IPSec Configuration 286
- 13-4 below) are applied 287
- 11.5 on page 253). Each 287
- 13.2 SSL/TLS 290
- 13.2.3 Secured Telnet 291
- 13.2.5 Client Certificates 293
- 13.3 SRTP 294
- 6-5 on page 147 296
- 13.5 Internal Firewall 298
- 5.6.8.3 on page 101) 299
- 13.6 Network Port Usage 300
- 13.7 Recommended Practices 301
- 13.8 Legal Notice 301
- 14 Diagnostics 303
- 14.2 Syslog Support 304
- 14.2.2 Operation 305
- 15 SNMP-Based Management 307
- 15.1.2 SNMP MIB Objects 308
- 15.2.1 Active Alarm Table 309
- 15.2.2 Alarm History 309
- 15.3 Cold Start Trap 310
- 15.4.1 Total Counters 311
- ♦ dsx1LineCoding 312
- ♦ dsx1LoopbackConfig 312
- ♦ dsx1CircuitIdentifier 312
- 15.6 Traps 314
- 15.7 SNMP Interface Details 315
- 15.7.1 SNMP Community Names 316
- 15.7.2 SNMP v3 USM Users 318
- 15.7.3 Trusted Managers 320
- 15.7.4 SNMP Ports 322
- 15.9 Dual Module Interface 325
- 15.10 SNMP NAT Traversal 326
- 15.11.1 Node Maintenance 327
- 15.11.2 Graceful Shutdown 327
- 16 Configuration Files 329
- ♦ Continuous 330
- ♦ Cadence 330
- ♦ Burst 330
- 16.3 Voice Prompts File 332
- 16.5 User Information File 333
- A.1 General Specifications 335
- A.3 TP-1610 Specifications 339
- A.4 TP-260 Specifications 341
- B Supplied SIP Software Kit 343
- C SIP Compliance Tables 345
- Header Field Supported 346
- C.4 SDP Headers 347
- C.5 SIP Responses 347
- D.2 An Overview of BootP 353
- D.3 Key Features 353
- D.4 Specifications 354
- D.5 Installation 354
- D.9 Log Window 356
- D.10.1 BootP Preferences 358
- D.10.2 TFTP Preferences 358
- D.11.1 Adding Clients 360
- D.11.2 Deleting Clients 360
- D.11.4 Testing the Client 361
- Allocation 365
- (RTCP-XR) 367
- 16.1 on page 329 370
- 16.3 on page 331 371
- 6.1 on page 127 374
- 16.2.1 on page 332 375
- G.2 PSTN Trace Utility 376
- H Release Reason Mapping 379
- Response 380
- I SNMP Traps 383
- I.1.4 Component: SS7#0 388
- I.1.6 Other Traps 391
- I.1.7 Trap Varbinds 392
- HTTP Server 393
- J.2 Linux Operation Systems 394
- K Regulatory Information 397
- Safety Notices 398
- Industry Canada Notice 398
- Digital Device Warnings 398
- FCC Statement 399
- Safety Notice 400
- FCC Digital Device Warnings 403
Produits connexes et manuels pour Passerelles/contrôleurs AudioCodes Mediant TP-1610 H.323
(52 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.051 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels