AudioCodes Mediant Series Spécifications télécharger pdf (Page 92)

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide

1725-86914-000_C.docx

September 2013 92

8. Add the Route Pattern

Note: What are the existing route patterns?

If some route patterns already exist in the system you would use the command

change route pattern x.

1 Enter the command add route-pattern x, where x is the number of the unique route

pattern you created in step 7 (In the test case 2 was used).

2 Set these parameters:

Name

Enter a meaningful name. The test used AC_Mediant Gateway

Group Number

Enter the Trunk Group Number you created in Step 4 (Mine is TG #2)

FRL

Choose a facility restriction level that will not compromise your sites'

security practices

Numbering Format

pub-unk

3 Press Esc-E to submit.

Note: Test the configuration

If you are not adding multiple T1’s / PRI’s, then your configuration should be complete

at this point and you should skip forward to the testing section to verify functionality.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 135 136

Pas de commentaire

AudioCodes Mediant Series Spécifications Page 92