AudioCodes Mediant 3000 Manuel d'utilisateur télécharger pdf (Page 52)

Microsoft Lync and ThinkTel SIP Trunk

AudioCodes Mediant E-SBC Series 52 Document #: LTRT-38110

4.11 Step 11: IP-to-IP Outbound Manipulation

This step shows how to configure manipulation tables. The Manipulation Table allows you

to configure number manipulation for the source or destination number for each IP Group.

Note: Adapt the manipulation table according to your environment's dial plan.

Figure 4-31: IP-to-IP Outbound Manipulation Table

In the above example Table, there are 4 entries:

Index #1 defines Destination manipulation of calls from IP Group 2 (ThinkTel Sip Trunk).

All calls received to Destination IP Group 1 and the Destination Number is any (*), add

prefix +1 to the destination number.

Index #2 defines Destination manipulation of calls from IP Group 1. All calls received to

Destination IP Group 2 and the Destination Number is with +1 prefix, remove this prefix

(+1) to the destination number.

Index #3 defines Destination manipulation of calls from IP Group 1. All calls received to

Destination IP Group 2 and the Destination Number is other than +1, remove the + prefix

and add prefix of 011 to the destination number.

Index #4 defines Source manipulation of calls from IP Group 1 (Lync Server). All calls

received to Destination IP Group 2 and the Source Number is with +1 prefix, remove this

prefix (+1) to the Source number.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 62 63

Pas de commentaire

AudioCodes Mediant 3000 Manuel d'utilisateur Page 52