AudioCodes Mediant 3000 Manuel d'utilisateur télécharger pdf (Page 37)

Microsoft Lync and ThinkTel SIP Trunk 37 June 2012

Microsoft Lync and ThinkTel SIP Trunk 4. Configuring the E-SBC Device

¾ To configure Proxy Set Table 2 for ThinkTel SIP Trunk:

1. Open the Proxy Sets Table page (Configuration tab > VoIP menu > Control

Network> Proxy Sets Table).

Figure 4-13: Proxy Sets Table 2

2. Set 'Proxy Set ID' to 2.

3. Configure ThinkTel IP-Address or FQDN and Destination Port (e.g.,

208.68.17.52:5060).

4. Set 'Transport Type' to UDP.

5. Set ‘SRD Index’ to 2 (this allows classification by Proxy Set for this SRD ID in the IP

Group pertaining to the ThinkTel SIP Trunk).

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 62 63

Pas de commentaire

AudioCodes Mediant 3000 Manuel d'utilisateur Page 37