AudioCodes MEDIAPACK VERSION 6.2 Manuel d'installation télécharger pdf (Page 30)

Installation Manual 30 Document #: LTRT-59813

MediaPack Series

3. Connect the wire-pairs at the other end of the cable to a male 50-pin Telco connector

(not supplied).

4. Insert and fasten the male connector to the female 50-pin Telco connector on the

MP-124 rear panel (labeled Analog FXS Lines 1-24).

5. Connect the telephone lines from the MDF adaptor block to a fax machine, modem, or

telephones by inserting each RJ-11 connector on the 2-wire line cords of the POTS

phones into the RJ-11 sockets on the front of an MDF adaptor block, as shown in the

figure below.

Figure 2-21: MP-124 in a 19-inch Rack with MDF Adaptor

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

Pas de commentaire

AudioCodes MEDIAPACK VERSION 6.2 Manuel d'installation Page 30