AudioCodes Mediant 600 Manuel d'installation télécharger pdf (Page 30)

Installation Manual 30 Document #: LTRT-85605

Mediant 600

8. In the ‘Gateway’ field, enter the IP address of the default gateway (if any).

9. Click Apply to save the new client.

10. Click OK; the ‘Client Configuration’ screen closes.

11. Physically reset the device using the hardware reset button (or power down and then

power up the device). This causes the device to use BootP; the device changes its

network parameters to the values provided by BootP.

Figure 3-2: BootP Client Configuration Screen

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

Pas de commentaire

AudioCodes Mediant 600 Manuel d'installation Page 30