AudioCodes MP-1FXS Manuel d'utilisateur télécharger pdf (Page 12)

Configuring Analog Extensions with AudioCodes Gateways Page 12 of 25

9. Select VoIP > Coders and profiles > Coders. Make sure that both G.711U-law and G.729 are in the list.

Figure 15: Confirm that G.711U-law and G.729 are listed in Coders and Profiles

10. Select VoIP > GW and IP to IP > Hunt Group > Endpoint Phone Number. Configure Entry 1 as follows.

Figure 16: Configure the endpoint phone extension

• Set Channel(s) to 1. (This means the first FXS port.)

• Set Phone Number to 167 (refer to the extension in

Figure 1).

• Set Hunt Group ID to 1.

• Set Tel Profile ID to 0.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Pas de commentaire

AudioCodes MP-1FXS Manuel d'utilisateur Page 12